|
Products:
Links:
 |
BASIC INSTALLATION:
-
Ensure you have a proper truss layout before
starting.
-
Prior to pouring the form, mark and cut your
joist locations and insert the 45 degree plates.
-
Pour the form and when concrete has set, insert
the joist member with the bearing bracket between the plates
-
From one side, fasten the beam through both
insert plates using three 4˝ #14 screws
INSIDE CORNER INSTALLATION:
-
Mark and cut and insert a 45 degree plate into
the corner of the form.
-
Insert a normal flat plate just outside the
corner, allowing for the width of the joist member.
-
Pour the form and when concrete has set, insert
the joist member with the bearing bracket between the plates
-
From one side, fasten the beam through both insert plates using three 4˝ #14 screws
OUTSIDE CORNER INSTALLATION:
-
Mark, cut and insert a 45 degree plate into the
corner of the form.
-
Insert a normal flat plate just outside the
corner, allowing for the width of the joist member.
-
Pour the form and when concrete has set, insert
the joist member with the bearing bracket between the plates
-
From one side, fasten the beam through both insert plates using three 4˝ #14 screws
|
BASIC - TOP VIEW
INSIDE CORNER - TOP
VIEW
OUTSIDE CORNER - TOP
VIEW |