Products:

Links:

For product information, please choose from the menu below

ICF-CONNECTOR™

The ICF-CONNECTOR™ is primarily used for hanging floor joists. However, it can also be used for exterior deck installations and fastening interior/exterior framed partition walls to ICF walls.

The ICF-CONNECTOR™ works by using a combination of stamped flat sheet insert plates with an adjustable stamped bearing bracket.
CONSISTS OF:

• 2 stamped flat sheet plates, which can be roughly installed within the form.

• An adjustable stamped bearing bracket which is accurately fixed after the concrete pour by simply screwing six #10 self-tapping/self-drilling screws (1.5” in length (38mm) or equivalent to the joist width) into the joists as specified.

NOTE: It is important to establish a proper truss or floor joist layout prior to installing the alignment system. This ensures the bracing system does not interfere with the hanger system.
 

© ICF-Connect 2007

Home  |  Joist Hanger  |  Roof/Hurricane  |  Mono Truss  |  Retrofit  |  Extended Bracket  |  45 Insert

Brochure  |  Gallery  |  Dist links  |  Contact Us   |  Engineer Reports  |  Installation Videos